Labor scheduling based on sales links a sales forecast to the staff hours you can afford. Hours budget = forecast net sales × target labor cost percentage ÷ employer cost per hour. Enter the target as a decimal, for example 0.33 for 33 percent. The result is a cost frame; tasks, skills and minimum staffing decide which shifts are actually possible. This article treats labor planning as a process: derive demand, set the budget, compare plan and actual, and correct course. For the target, use your restaurant's labor cost percentage; how to calculate and benchmark it is in the linked article.
Contents
- Why scheduling by habit costs money
- What you need for the calculation
- Worked example: how many labor hours can a day carry?
- Splitting hours across lunch, evening and off-peak
- RPLH: the daily metric for plan and actual
- Five steps to a sales-based schedule
- Four scheduling mistakes
- Labor planning across several locations
- How Kiosa supports planning
- FAQ
- Your next steps
Why scheduling by habit costs money
Labor is the biggest lever in a restaurant. In Germany, according to the Federal Statistical Office, personnel expenses in restaurants, bars, snack bars and cafés came to 32.8% of sales in 2024 (2019: 30.6%; Destatis, table 48112-0001, own calculation from personnel expenses and sales). What matters, though, is your own trend per location and week.
Even so, in many restaurants the schedule gets made like this: the general manager opens last week's rota, changes two shifts because of holiday requests and sends it out. Who works when is then decided by the last schedule, not by the sales forecast. What happens:
- Overstaffing on slow days. Three servers on a Monday, even though the place is empty from 14:00. Cost: around €180 per Monday, €9,360 a year, per location.
- Understaffing on busy days. Friday night with four people when six are needed. Guests wait longer, tables turn more slowly, dwell time rises from 55 to 72 minutes. Fewer covers, less sales.
- Uneven workload. Your best people always work Friday and Saturday, the new ones always Monday. After six months the best ones quit.
The maths is simple: one percentage point of deviation in labor cost percentage costs a restaurant with €1 million in annual sales €10,000. Across ten locations, that's €100,000.
What you need for the calculation
| Input | What matters |
|---|---|
| Sales forecast | Net sales per location, day and ideally time slot |
| Target labor cost percentage | Derived from your cost structure and service concept |
| Employer cost per hour | Costs and hours on the same definition; account for your staff and skills mix |
| Operational requirements | Prep, cleaning, stations, minimum staffing and availability |
A sales forecast is an expectation, not guaranteed income. Take the last eight weeks, calculate the average sales per weekday and correct for public holidays, events and weather. The restaurant sales forecasting basics explain how to judge a forecast; an average error value doesn't guarantee accuracy for any single shift.
An example of the sales split in a casual dining restaurant:
| Day | Average, last 8 weeks | Share of weekly sales |
|---|---|---|
| Monday | €2,800 | 9% |
| Tuesday | €3,100 | 10% |
| Wednesday | €3,600 | 12% |
| Thursday | €4,200 | 14% |
| Friday | €6,800 | 22% |
| Saturday | €6,400 | 21% |
| Sunday | €3,600 | 12% |
The difference between Monday and Friday: a factor of 2.4. Your staffing should reflect that difference.
Worked example: how many labor hours can a day carry?
The following figures are model assumptions: €5,000 expected net sales, a 33 percent target and €22 average employer cost per hour.
5,000 × 0.33 ÷ 22 = 75 labor hours.
You can read the same calculation as a productivity target: 22 ÷ 0.33 = €66.67 net sales per labor hour. 5,000 ÷ 66.67 gives roughly 75 hours.
The 75 hours cover every activity included in the cost base. If you schedule prep and cleaning on top, you have to fit those hours into the total budget or adjust the target deliberately. A fixed base layer must not end up unnoticed on top of a budget that was already fully calculated.
Splitting hours across lunch, evening and off-peak
| Time slot | Model forecast, net | Calculated frame at €66.67/hour |
|---|---|---|
| Lunch | €1,400 | 21.0 hours |
| Afternoon | €500 | 7.5 hours |
| Evening | €3,100 | 46.5 hours |
| Total | €5,000 | 75.0 hours |
This frame doesn't become a workable schedule if you spread hours evenly without thinking. Check peak times, prep tasks and the stations you need. Most POS systems give you the hourly sales split. The minimum staffing you need may exceed the calculated frame; then you have to review opening hours, processes or the financial target.
RPLH: the daily metric for plan and actual
Revenue per labor hour, RPLH for short, is sales per labor hour worked: RPLH = net sales / labor hours worked. The productivity target of €66.67 calculated above is nothing other than a target RPLH. Alternatively, set the target RPLH directly from your data, not from the best or worst day, but as the median of the last three months. Then: planned hours = expected sales / target RPLH.
An example: your restaurant takes €4,200 net on a Thursday and your team works 56 hours (floor, kitchen, bar). RPLH is €75. With a target RPLH of €75, an expected Friday of €6,800 gives 90.7 planned hours, and €2,800 on Monday only 37.3. That's almost half. Yet many restaurants staff Monday at 70% of Friday's level.
Why RPLH alongside labor cost percentage? It tells you immediately whether a day was efficient, independent of wage levels, payroll taxes and the mix of casual staff. You need labor cost percentage for the monthly view and RPLH for daily steering. Different wage rates can produce different cost percentages at the same RPLH, so with mixed teams always check the cost in euros as well.
RPLH guide values by restaurant type
| Restaurant type | RPLH guide value | Typical range |
|---|---|---|
| Quick service / fast casual | €85-110 | €70-130 |
| Casual dining | €60-85 | €50-100 |
| Fine dining | €45-70 | €35-90 |
These numbers vary by city, price level and restaurant size. The point isn't to hit a particular value, but to know your own benchmark and spot deviations. If RPLH is normally €78 and suddenly €52 on a Tuesday, either sales were unusually low or there were too many people on shift.
RPLH by time of day
The daily total often hides the real problems. An RPLH of €75 sounds solid, but if it is €110 at lunch and €48 in the evening, the evening shift is running inefficiently.
- Early shift (06:00-11:00): Often low, because of prep. Acceptable.
- Lunch peak (11:30-14:00): Should be the highest value. If it isn't, lunch is overstaffed.
- Afternoon (14:00-17:00): The critical phase. Many restaurants have too many people here for too little business.
- Evening peak (18:00-22:00): Understaffing shows here as a falling average check, because guests order fewer desserts and drinks when service is slow.
Five steps to a sales-based schedule
- Define the forecast: set location, day and net revenue. Look at delivery and dine-in separately where they have different requirements.
- Calculate the hours budget: document the target percentage and employer cost (or the target RPLH) transparently.
- Build in operational requirements: account for stations, skills, prep and cleaning, and spread hours across the day in proportion to the expected sales curve.
- Check the plan against the budget: with different wage rates, calculate the planned cost in euros, don't just count hours.
- Review after the shift: compare actual sales, actual hours, costs and service quality. If sales were higher than expected, the schedule wasn't the cause. If RPLH was low despite sales coming in as planned, too many people were on. This daily check takes two minutes and shows you within a week where your plan is systematically off.
The article on restaurant labor cost percentage explains the cost base. Restaurant location benchmarking helps you put differences between restaurants into context.
Four scheduling mistakes
1. Spreading staff evenly across the week. The most common mistake: every weekday has roughly the same number of shifts, even though in many restaurants Friday brings in more than twice as much as Monday. Distributing labor hours in proportion to sales saves a typical restaurant with €800,000 annual sales between €12,000 and €18,000 a year, with no loss of quality, just through smarter distribution.
2. Fixed shift lengths. Eight-hour shifts for everyone sounds fair, but it's expensive: if the lunch peak runs from 11:30 to 14:00 and the evening peak starts at 18:00, you have four idle hours from 14:00 to 18:00, per employee. Flexible shift models with shorter blocks for peaks work better. Whether that removes hours depends on demand, employment law and service needs, and has to be measured in the plan vs. actual comparison.
3. No distinction between floor and kitchen. Floor hours have to correlate with guest volume. Kitchen hours follow a different logic: prep in the morning, production during peaks, cleaning at night. So calculate floor RPLH and kitchen RPLH separately.
4. Make the schedule and forget it. The schedule is done on Sunday, on Monday a large booking comes in, on Tuesday someone calls in sick, on Wednesday terrace sales are 40% above plan. Good labor planning needs daily adjustments. To make sure changes reach the team, take a look at a restaurant employee scheduling app.
Labor planning across several locations
With one location you can still do the planning in your head. From three locations, that no longer works.
Comparability. Location A has an RPLH of €82, location B €61. Is B managed worse? Not necessarily: B may have a higher price level and fewer covers, or more kitchen prep time. Locations only become comparable when you calculate the same metrics the same way: the same definition of labor hours (with or without breaks, general manager included or not) and the same sales base (net).
Transferring best practice. If location C consistently needs 8% fewer labor hours than location D at similar sales, there's a pattern behind it: more flexible shift lengths, daily adjustment or a more efficient station layout. Differences like these stand out in a restaurant sales analysis when you see all locations' data centrally.
Central or decentralised. With central planning, head office sets planned hours per location and day and the general manager distributes them: consistent, but not very flexible. With decentralised planning within guardrails, each location plans itself inside defined RPLH corridors, and a warning fires when the deviation is too large: local knowledge feeds in, at the cost of more spread. Most of the successful chains I know run the second model: guardrails instead of control.
How Kiosa supports planning
Kiosa One View brings sales and labor figures together and supports looking at forecast and actual development per location. The Scheduling module (+€99 per location per month) builds a shift draft from the sales forecast and checks rest periods, maximum hours and contracts. Which data is available depends on the modules you book, the connected sources and complete time records.
A calculated hours budget doesn't replace the decision of the responsible manager. Availability, skills and operational needs remain part of planning.
From analysis to action
What this is about: a labor planning process from sales forecast through hours budget and sales per labor hour to plan vs. actual control.
Put it into practice:
- Sales forecast and actual hours in Kiosa One View
- Kiosa Scheduling: shift draft from the sales forecast
More on Labor costs and scheduling
- Restaurant Labor Cost Percentage: How to Calculate and Benchmark It
- Restaurant Sales Forecasting: Data Instead of Flying Blind
- Restaurant Staff Scheduling: Build a Rota, Avoid Mistakes
FAQ
How do I calculate labor hours from sales?
Forecast net sales times target labor cost percentage as a decimal, divided by employer cost per hour. That gives a calculated cost frame you then reconcile with operational requirements. Alternatively, divide expected sales by your target RPLH.
What is RPLH and how do I calculate it?
RPLH stands for revenue per labor hour: net sales divided by labor hours worked. It suits daily steering; labor cost percentage suits the monthly view.
Is sales per labor hour the same as labor cost percentage?
No. Hourly productivity compares sales and hours, labor cost percentage compares sales and costs. Different wage rates can produce different cost percentages at the same hourly productivity.
What do I do if minimum staffing exceeds the budget?
Document the deviation and review opening hours, workflows, forecast and target percentage. A financial target doesn't override operational or legal requirements.
Do prep and cleaning belong in the hours budget?
Yes, if the target percentage is meant to cover total labor cost. If these tasks are added on top of the calculated total budget, the actual percentage goes up.
Your next steps
- Calculate RPLH for the last four weeks, per day. All you need is sales data and labor hours from your workforce system.
- Analyse the sales split: what percentage of your weekly sales falls on which day, and what does the hourly split look like?
- Adjust planned hours: distribute next week's hours in proportion to expected sales and measure the difference. The effect shows in the very first week.
Check your starting percentage in the labor cost calculator. Then compare expected net sales, planned hours and actual hours for one day.
Want to see forecast and labor figures for your locations together? See Kiosa in a demo call.
Related terms
- Scheduling efficiency: planned versus actually needed labor hours
- Labor cost ratio: the target metric for labor planning
- Forecasting: sales forecasting as the basis for shift planning