Data Insights

Restaurant KPIs: 8 Metrics with Formulas, Rhythm and Examples

Updated on 9 min read

The most important restaurant KPIs are net sales, labor cost percentage, food cost percentage, prime cost percentage, average check, sales per labor hour, RevPASH and contribution margin. Together they show a restaurant's demand, costs and contribution to profit. Calculate them for the same period and the same locations; generic benchmarks do not replace a comparison of your own concept.

This guide explains the formulas and shows how to use the KPIs as a scorecard in a daily, weekly and monthly management routine per location.

The key restaurant KPIs at a glance

KPI Formula Unit
Net sales Total revenue excluding sales tax Euros
Labor cost percentage Total labor cost ÷ net sales × 100 Percent
Food cost percentage Food usage ÷ net sales × 100 Percent
Prime cost percentage (Labor + food usage) ÷ net sales × 100 Percent
Average check Net sales ÷ number of checks Euros per check
Sales per labor hour Net sales ÷ staff hours worked Euros per hour
RevPASH Net sales ÷ available seat hours Euros per seat hour
Contribution margin Net sales − defined variable costs Euros

With mixed tax rates, derive net sales from the net revenue in your POS or accounts. Do not divide total gross sales by a single tax rate.

1. Net sales: the common basis for calculation

Net sales are the basis for all cost percentages. Record returns, voids and revenue reductions by the same rule in every comparison period. Food, drinks and delivery should remain separately analysable.

More sales do not prove better profitability. Check whether additional revenue comes from higher prices, more checks or a different sales mix. The restaurant sales analysis guide helps break these drivers down.

2. Labor cost percentage: include total employer costs

Labor cost percentage = total labor cost ÷ net sales × 100.

Wages, salaries, employer contributions and other personnel expenses belong in the numerator. Paid holiday and sick days already included in pay are not added a second time. With €24,000 total labor cost and €80,000 net sales, the percentage is 30 percent. That is a model calculation, not a general target.

The detailed guide to restaurant labor cost percentage explains the cost basis and how to interpret it. In the labor cost calculator you can enter your own figures.

3. Food cost percentage: measure usage, not purchases

Food usage = opening stock + purchases − closing stock.

Food cost percentage = food usage ÷ net sales × 100.

This requires consistent stock valuation and properly timed stock counts. With €8,000 opening stock, €22,000 purchases and €6,000 closing stock, usage is €24,000. With €80,000 net sales, the percentage is 30 percent.

Stocking up is not usage. Transfers between locations, staff meals and documented losses must remain traceable. The food cost calculator calculates the percentage; actual vs theoretical food cost explains deviations from recipe costs.

4. Prime cost: look at labor and food together

Prime cost percentage = (total labor cost + food usage) ÷ net sales × 100.

In the model calculation with €24,000 labor, €24,000 food and €80,000 net sales, it is 60 percent. The remaining 40 percent has to cover occupancy costs, energy, other expenses and the result. That is why the remaining cost structure determines whether a given prime cost percentage is sustainable.

The restaurant prime cost guide goes deeper into managing both together. A low percentage alone does not prove a well-run business: understaffing or incomplete costs distort the picture.

5. Average check: distinguish between check and guest

Average check = net sales ÷ number of checks.

€80,000 net sales across 4,000 checks gives €20 per check. If several guests sit at one table and pay together, that is not automatically sales per guest. Document whether you are counting checks, guests or transactions.

A change in average check can be due to prices, add-on sales or the share of delivery orders. So compare the same channel and the same daypart. The definition is in the average check glossary entry.

6. Sales per labor hour: compare staff productivity

Sales per labor hour = net sales ÷ staff hours worked.

With €80,000 net sales and 1,200 hours, the result is €66.67 per hour. For a fair comparison, prep, cleaning and management hours must be treated the same way. A high value can mean efficiency or too few staff; check service quality and workload at the same time.

Labor scheduling based on sales links this KPI to a sales forecast and an hours budget.

7. RevPASH: revenue per available seat hour

RevPASH = net sales ÷ (available seats × opening hours).

40 seats over 10 opening hours gives 400 seat hours. With €4,000 net sales from dine-in, RevPASH is €10. Delivery and takeaway sales should be kept separate for this comparison, because they do not need seats.

RevPASH links capacity, opening hours and sales. The RevPASH definition and the guide to table utilization explain how to use it in a location comparison.

8. Contribution margin: disclose what you deduct

Contribution margin = net sales − variable costs.

Which costs you deduct depends on the question. A contribution margin per dish after ingredient costs is something different from a location contribution after further costs. Write down the costs included before you compare amounts between restaurants.

The contribution margin definition helps with this distinction. For the menu, menu engineering links the contribution per dish with its popularity.

Reference ranges by concept type

The following ranges are orientation for getting started, not targets. Your benchmark is your own figure from the previous year, adjusted for deliberate changes. Industry figures only help you position yourself.

KPI Quick service Casual dining Fine dining
Food cost percentage 28-33% 26-32% 30-38%
Average check €8-14 €18-32 €55-120
Sales per labor hour €90-120 €70-100 €45-75

For prime cost percentage, a rough guide is: below 60% as the target, 60 to 65% as acceptable, above 65% as critical. With 60% prime cost and 15% rent, 25% remains for everything else; with 70% prime cost and 15% rent, only 15%, and energy, insurance and maintenance still come out of that. For labor cost percentage: according to the German Federal Statistical Office, personnel expenses in German restaurants, bars, snack bars and cafés were 32.8% of sales in 2024 (2019: 30.6%; Destatis, table 48112-0001, our own calculation from personnel expenses and sales). What matters is your own trend per location and week.

Which KPI how often: the scorecard rhythm

A monthly P&L on its own comes too late for daily corrections. The scorecard adds early signals and spreads the KPIs across three rhythms:

Daily (morning, 2 minutes):

  • Net sales: deviation against last week (same weekday) and plan
  • Covers: footfall check
  • Sales per labor hour: the previous day's staff efficiency
  • Average check: deviations of more than 5% from the 4-week average are a signal

Weekly (Monday, 10 minutes):

  • Labor cost percentage: projection based on hours worked, exact once the monthly P&L arrives
  • Food cost percentage: reconcile after every stock count, ideally at item-group level
  • Average check: trend over the week

Monthly (after the P&L arrives, 30 minutes):

  • Prime cost percentage: exact, with all on-costs; weekly only as a projection
  • Contribution margin per location: the strategic view, in detail every quarter with rent adjustments and seasonal effects

The difficulty is not the method but data availability. If sales sit in the POS, labor hours in the scheduling tool and costs in the accounts, the daily check is a manual act, and manual acts last two weeks. How systematic restaurant financial controlling sets up this rhythm for businesses of any size is covered in the controlling guide.

Typical mistakes per KPI

KPI Typical mistake
Net sales Confusing gross and net: POS systems show gross, the P&L shows net. If you calculate labor cost percentage on gross sales, you see a percentage that is too low, because gross sits above net by the sales tax, which varies with your mix of food and drinks.
Labor cost percentage Adopting a benchmark blindly: 30% is too high for a quick-service restaurant and a dream figure for fine dining. Dividing only gross wages by sales instead of using total labor cost.
Food cost percentage Only looking monthly: by the time the P&L arrives, price increases or shrinkage are already four weeks old. The overall percentage also hides individual dishes that are far above it.
Average check Trying to raise it without understanding the cause: menu, staff, daypart and guest mix all work differently. The distribution of checks tells you more than the average.
Sales per labor hour Lumping service and kitchen hours together: the kitchen needs prep time regardless of sales, while service scales with the number of guests.
Prime cost Optimising labor cost percentage and food cost in isolation: a low labor cost percentage can come from too few staff, with falling sales as a consequence.
Contribution margin Confusing it with profit: head office, IT, marketing and management are not yet covered.

For staff productivity, an example shows what matters: €4,200 net sales on Thursday with 42 productive hours gives €100 per hour; on Monday, €2,100 with 35 hours gives only €60. The question is not whether Monday was bad, but why 35 hours were scheduled for half the sales. With several locations, this KPI becomes the strongest comparison tool: if location A works at €95 per hour and location B at €62, B has either a sales problem or a scheduling problem.

Three mistakes in KPI monitoring

1. Only looking at sales. The most dangerous mistake, because it feels good. If sales rise by 5% and labor cost by 9%, you are worse off than before despite the growth. Sales without cost context is self-deception.

2. Adopting benchmarks blindly. Your concept with an open kitchen and sommelier service has a different structure from a snack bar. Industry figures are orientation, not targets.

3. Reacting too late. The monthly P&L typically arrives around the 20th of the following month. If only then do you notice that food cost in February was 36% instead of 30%, you have lost 50 days. Over 50 days at €100,000 monthly sales and a 6 percentage point deviation, that is €10,000. If you check weekly, you limit the damage to one week.

Individual KPIs are useful; their combination is what lets you manage. Labor cost percentage alone says labor is expensive. Labor cost percentage plus sales per labor hour plus average check says that on Tuesdays too many people are on for too little sales, and service is not selling desserts.

Comparing KPIs fairly across locations

Use the same period, the same net basis and the same cost rules. Separate new locations, different service concepts and unusual closure days. Restaurant location benchmarking shows a comparison table with trading days and labor hours.

You can track sales and cost percentages per location together in Kiosa One View; how meaningful they are depends on the connected sources and how complete they are.

If you want to pass on KPIs per location and month with the prior year to shareholders or investors, the Excel template for investor reporting helps. It calculates food cost percentage, labor cost percentage and prime cost as formulas; the sample data is fictitious.

Everything on KPIs, sales and forecasting

Related on kiosa.ai:

From analysis to action

What this is about: definition, formula, measuring rhythm and context for the eight core KPIs.

Put it into practice: Track your KPIs daily in Kiosa One View

FAQ

Which KPIs should I calculate first as an operator?

Net sales, labor cost percentage and food cost percentage. The two cost blocks give you the prime cost percentage. Add average check and staff productivity to explain changes.

What benchmarks apply to restaurant KPIs?

No single target fits all concepts. Compare service level, cost basis, sales mix and period. An industry figure only makes sense if the source, survey year and comparable businesses are known.

Which KPIs are in the monthly P&L?

Typically revenue, cost of goods, gross profit, labor and other costs, and a provisional result. From these you can derive cost and profit percentages. Structure and completeness depend on the format of the P&L and the state of the bookkeeping.

How often should I check the KPIs?

Sales and operational deviations daily, staff productivity and cost trends weekly, the overall accounting view monthly. The rhythm has to match the availability and reliability of your data; the breakdown is in the scorecard above.

Why is the monthly P&L alone not enough?

It arrives around the 20th of the following month and shows what happened weeks ago. For daily corrections you need early signals such as sales, covers and hours; the P&L remains for the exact monthly view.

Is sales per employee the same as sales per labor hour?

No. Sales per employee or per full-time equivalent compares staff size over a period. Sales per labor hour relates sales to hours actually worked and is better suited to comparing shifts.

Your next steps

Calculate the percentages with the labor cost calculator and the food cost calculator. Then use the scorecard rhythm to decide who checks which deviation.

Want to bring this view together across your locations? See Kiosa in a demo call.

Sven Schneider

About the author

Sven Schneider — Founder of Kiosa and Ragazzi Concepts. 15 years in multi-unit restaurants; helped grow Mama Trattoria from 0 to 10 locations in Hamburg.

Kiosa Dashboard

All your numbers. One view. Instantly.

What you just read, Kiosa does automatically: every day, for every location, without you having to piece anything together.

Book a demo call
All articles

Data: Kiosa Gastro-Index (in German): 269,448 venues across Germany, Austria and Switzerland, measured.